Skip to content
Glossary

What Is a Service Disconnect?

A service disconnect is a switch or breaker that shuts off power from the utility to a building's electrical system. It may be part of the main panel or housed in a separate box. Its position affects where power enters and how it reaches the rest of the building.

Quick Facts About Service Disconnect

Category
Electrical service equipment
Used for
Control of incoming utility power
Common confusion
Branch circuit breaker
Also called
Main Disconnect
Often discussed with
Electrical Panel Upgrade

Key Takeaways About Service Disconnect

  • A main breaker may serve as the service disconnect.
  • Some parts can remain live after the disconnect is off.
  • A branch breaker controls a smaller part of the system.

How Service Disconnect Works

A worker adjusts an open electrical panel on an exterior wall with a red screwdriver

A service disconnect opens or closes the path that carries utility power. In the off position, the path opens and power stops flowing to the equipment it feeds. A breaker can also open that path when too much current flows through it. Related service: Electrical Panel Upgrade.

Related glossary terms: Branch Circuit, Load Center, Backfeed.

A branch circuit is a smaller path that feeds lights or outlets. Its breaker controls that path, not the whole service. A panel can hold branch breakers alongside a main breaker.

The service disconnect has an incoming side and an outgoing side. The incoming side may still have power when the disconnect is off. A backup power source can also feed parts of a home's system through a separate path.

Hands use a screwdriver on a black electrical switch inside an open metal box outdoors

From the Center Electric Service team

When we plan a panel upgrade, we check where the service disconnect sits. We also look at how the existing wires reach the panel. That helps us plan how the new panel will connect to the service.

Service Disconnect in Practice: A Real-World Example

During a panel upgrade, a home may have its service disconnect in a box near the meter. The new panel connects to the wiring that leaves that box.

Related Terms

Branch Circuit

A branch circuit is a set of wires that carries power from a breaker or fuse to outlets or equipment.

Load Center

A load center is an electrical box that sends power to circuits throughout a building.

Backfeed

Backfeed is a flow of electric power in the reverse of its usual direction.

Feeder

A feeder is a set of wires that carries power from electrical service equipment to a panel or other power equipment.

Center Electric Service

Have Questions About Service Disconnect?

Contact Center Electric Service for practical guidance on Service Disconnect and related 24 hour electrician work in Riverside.

(951) 577-3540