Skip to content
Glossary

What Is an Intersystem Bonding Termination?

An intersystem bonding termination is a connection point that links cable and phone system grounding wires to a building's electrical grounding system. This link helps keep those systems at a similar electrical voltage. Voltage is the electrical force that pushes current. The connection point is often near the electric service equipment.

Quick Facts About Intersystem Bonding Termination

Category
Electrical bonding connection
Used for
Connecting communication system grounding wires
Common confusion
Not a power outlet
Also called
IBT, Intersystem bonding termination device
Often discussed with
Electrical Code Correction, Electrical Grounding Installation

Key Takeaways About Intersystem Bonding Termination

  • The connection point is accessible without opening electrical equipment.
  • Cable and phone wires attach at the bonding point.
  • A bonding point isn't a power outlet.

How Intersystem Bonding Termination Works

Hands connect and tighten electrical ground wires on a textured exterior wall with metal clamps

An intersystem bonding termination joins grounding wires from separate systems. Each wire has a place to connect to the bonding point. The bonding point also connects to the building's electrical grounding system.

Related glossary terms: Bonding, Ground Rod, Service Disconnect.

The link helps reduce voltage differences between the connected systems. A voltage difference is a difference in electrical force between points. For example, a cable line and electrical equipment may be linked through the bonding point.

The bonding point has places where wires can attach. Some are built into a piece of service equipment. Others are separate parts mounted nearby. The connection points stay accessible without opening the electrical equipment.

Bonding means joining metal parts or systems electrically. Grounding connects an electrical system to the earth. The bonding point is part of the path between systems, not the ground rod itself.

Close-up of an outdoor metal grounding clamp connecting several copper and insulated wires on a stone surface

From the Center Electric Service team

When we check an intersystem bonding termination during electrical code correction, we look at the wire connections and their location. We also check how the bonding point connects to the electrical grounding system. That helps us plan a correction that fits the existing equipment.

Intersystem Bonding Termination in Practice: A Real-World Example

A Riverside home has a cable grounding wire that isn't connected to the bonding point. During electrical code correction, an electrician checks the connection and plans the needed repair.

Related Terms

Bonding

Bonding is the joining of metal parts in an electrical system to create a path for fault current.

Ground Rod

A ground rod is a metal rod placed in the earth and connected to a building's electrical grounding system.

Service Disconnect

A service disconnect is a switch or breaker that shuts off power from the utility to a building's electrical system.

Open Ground

An open ground is a break or missing link in an outlet's path to ground.

Center Electric Service

Have Questions About Intersystem Bonding Termination?

Contact Center Electric Service for practical guidance on Intersystem Bonding Termination and related 24 hour electrician work in Riverside.

(951) 577-3540